Cab Electrical & Lighting – 2027 Raider ICE Data Book

Advanced Driver Assistance Systems (ADAS)

Mobileye 8 Optional (Instrumentation – ADAS)

Forward-facing camera on inside of windshield. 2" EyeWatch™ display in center of dashboard (analog) or on top of Fortris touchscreen. Includes GPS unit. Provides:

Forward Collision Warning (FCW) – alerts of imminent rear-end collision
Lane Departure Warning (LDW) – alerts if vehicle leaves lane without turn signal
Pedestrian & Cyclist Collision Warning (PCW) – alerts of imminent collision with pedestrian/cyclist
Headway Monitoring & Warning (HMW) – alerts when following distance becomes unsafe
Speed Limit Indication (SLI) – notifies of new speed limit and when driver exceeds it

Bendix Fusion Wingman 3.0 Optional — Requires Fortris Hub (Instrumentation – ADAS)

Integrates radar, camera, and brakes. Forward-facing camera inside windshield; forward-facing radar in front bumper; Fortris Hub display. Provides:

Autonomous Emergency Braking (AEB) – alerts driver and automatically applies up to full service brakes when forward collision is likely
Lane Departure Warning (LDW) – at speeds >37 mph (50 kph) without turn signal
Highway Departure Warning & Braking (HDW/HDB) – alerts and may apply brakes if vehicle unintentionally leaves roadway
Active Cruise with Braking (ACB) Auto-Resume – re-engages cruise after system brakes above certain speed threshold
Active Cruise with Braking (ACB) Stop & Driver Go – resume cruise after braking to stop without pushing resume switch
Following Distance Alerts (FDA) – audible and visual alerts when too close to forward vehicle
Overspeed Alert (OA) – alerts driver when traveling +5 mph over posted speed limit

Electronics & Entertainment

Radio – AM/FM/Bluetooth/Hands-Free Standard

Single DIN stereo receiver, mounted in overhead console. Built-in Bluetooth for wireless music streaming and hands-free talking, AM/FM radio with 30 station memory, USB flash drive reader, SD memory card reader, AUX (3.5mm) input jack, rear panel RCA connectors, remote control.

Radio – FM/AUX Input/USB Optional

Single DIN stereo receiver in overhead console. FM radio with 6 station memory, USB input, AUX input jack.

Radio Speakers Standard

Two 6" coaxial, 50-watt with integral grille. Standard with all radio options.

Radio Delete Optional

No radio or speakers. 16 ga steel powder coated Storm Gray covers over radio and speaker openings.

2-Way Radio Pre-Wire

Radio Connection Posts Optional (Instrumentation – 12V Power Options)

Terminal block on RH side of dash. Two (2) color-coded (red/black) 5-way binding posts, circuit fused at 15A max.

Radio Circuit Wiring – Dash, Battery Optional (Instrumentation – 12V Power Options)

8-gauge wire labeled "2-way radio" coiled in center dash, 30-amp auto-reset circuit breaker, wired to battery.

Radio Circuit Wiring – Overhead Console, Battery Optional (Instrumentation – 12V Power Options)

8-gauge wire to overhead console, 30-amp auto-reset circuit breaker, wired to battery.

Radio Circuit Wiring – Dash, Ignition Optional (Instrumentation – 12V Power Options)

8-gauge wire in center dash, 30-amp auto-reset circuit breaker, wired to ignition.

Radio Circuit Wiring – Overhead Console, Ignition Optional (Instrumentation – 12V Power Options)

8-gauge wire to overhead console, 30-amp auto-reset circuit breaker, wired to ignition.

Telematics & Power Ports

Telematics – Fortris Hub Optional (Instrumentation – Instrument Cluster)

Telematics is a standard feature on the Fortris Hub option.

Telematics – Geotab Optional (Instrumentation – Telematics)

Geotab device installed in vehicle.

Power Port – 12V DC Standard

Two (2) 12V DC power sockets with attached dust caps, mounted in center section of dash (one per side).

USB Power Port – Dual Standard

Dual USB Type A power outlets with attached dust cap in center dash. One 1.0A port and one 2.1A port in single housing.

Diagnostic Connector Standard

Deutsch HD10 series, 9-pin J1939 Type II square-flange OBD connector, green body, located under dash near steering column. Black "OBD" cap tethered to connector.

Exterior Lighting

Headlights – LED Standard

5" × 7" rectangular LED headlamps, black background. Low beam: 1,800 lumens / 602 LUX @ 25ft / 35K candela. High beam: 3,900 lumens / 1,129 LUX @ 25ft / 65K candela. 6,500K color intensity. Lexan polycarbonate front cover.

Daytime Running Lights Standard

Automatically turn on with vehicle running. Utilizes low beam function in headlights.

Front Park / Turn Lights Standard

2.25" × 6.5" oval, amber polycarbonate lens and housing, 14 LEDs, park/turn function.

4-Way Flashers During Auto or Forced Neutral Optional (Instrumentation - Cab, Flasher Options)

Automatically actuates 4-way flashers when either Auto-Neutral or Forced-Neutral system is activated.

Side Marker Lights Standard

1.63" × 4.5" rectangular, amber polycarbonate lens, LEDs, marker light function.

Clearance / Marker Lights – Roof or Visor Mounted Standard

Roof mounted (no visor): 2" × 4" rectangular, amber, 14 LEDs — 3 clearance + 2 marker.
Visor mounted: 1.25" round, amber, 6 LEDs — 3 clearance + 2 marker.

HARNESS, BODY TO TAILBOARD – OPTIONAL Optional (Chassis – Rear Bumper / Taillights)

Electrical harness to extend taillight circuits to tailboard.

Temporary Taillights and Mudflaps Optional (Chassis – Rear Bumper / Taillights)

Driveaway kit: two (2) combination stop/tail/side marker lights (one with clear lens for license plate), one (1) backup light, two (2) mudflaps — all on wood structure affixed to rear frame.

Back-of-Cab Work Lights – Upper Rear Optional (Lighting – Back of Cab Lights)

Two (2) square work lights at upper rear corners of cab. 2,100 lumens each, 16 LEDs per light, powder coated aluminum housing, clear shatterproof polycarbonate lens, adjustable stainless steel mounting brackets. Rocker switch "Flood Light" in dash.

Strobe Lights (Lighting – Strobe Lights) (Lighting – Roof/Visor Lights)

Strobe Lights – High Mount, Forward Facing Optional

Two (2) 1.7" × 3.5" amber warning lights, 3 LEDs per light. 17 selectable flash patterns. Mounted between forward clearance and marker lights above windshield (or on visor). Rocker switch "Strobe" in dash.

Strobe Lights – A-Pillar, Side Facing Optional

Two (2) 2" × 5" amber warning lights (1 per side), 6 LEDs per light, amber lens, 25 selectable flash patterns. Mounted on lower A-pillar in front of door.

Strobe Lights – Low Mount, Forward Facing Optional

Two (2) 1.4" × 6.2" amber/white dual-color warning lights, 6 LEDs per light, 70 selectable flash patterns. Mounted vertically between grille and headlight on front panel.

Strobe Lights – Low Mount, Forward & Side Facing Optional

Four (4) 2" × 5" amber warning lights (2 front, 1 per side), 6 LEDs per light, 25 selectable flash patterns.

Interior Lighting

Dome / Map Lights Standard

3.5" × 7.75" oval assembly in overhead console. Two (2) 2" × 2.75" directional clear lens (one each LH/RH). Push lens to turn on/off. Gray bezels.

Dome Light – Additional Optional (Lighting – Interior Lights)

Two (2) additional dome lights in headliner outboard LH and RH seating positions. 6" diameter, 6 LEDs, integrated push button on/off.

Under Dash Lights Standard

Two (2) 3/4" diameter footwell lights (1 per side), LED with clear lens, polycarbonate housing. Actuated by door switch.

Back-Up Alarms (Electrical – Backup Alarm)

Back-Up Alarm – ECCO 575 Standard

ECCO model 575. 107 dB(a) sound pressure level, 960–1440 Hz frequency. Reinforced nylon housing. Mounted behind rear axle. SAE Type B certification and IP64 ingress protection.

Back-Up Alarm – ECCO RMA907 Optional

Kit includes SA907 smart alarm with DS-1500 reverse directional driveline sensor. 82–107 dB(a), auto-adjusts based on ambient noise. Directional sensor activates any time vehicle moves backward. Meets California refuse truck alarm requirements. IP64.

Back-Up Alarm – ECCO Preco1059 Optional

Kit includes 1059 alarm with DS-1500 driveline sensor. 87–112 dB(a), auto-adjusts, dual function. Directional sensor activates on reverse movement. Meets California refuse requirements. IP66.